DIN EN ISO 8752, raskas sarja

DIN EN ISO 8752, raskas sarja

1) Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer

2) d3 is smaller than d1 nominal

Diameter NominalBefore InsertionChamfer LengthWall ThicknessRecommended Hole SizeDouble Shear in kN (2)
d1d2 (1)MinMaxMina 
MinMax Maxs
1 1.2 1.3 0.8 0.15 0.35 0.2     0.7
1.5 1.7 1.8 1.1 0.25 0.45 0.3     1.58
2 2.3 2.4 1.5 0.35 0.55 0.4 2.0 2.1 2.82
2.5 2.8 2.9 1.8 0.4 0.6 0.5 2.5 2.6 4.38
3 3.3 3.5 2.1 0.5 0.7 0.6 3.0 3.1 6.32
3.5 3.8 4 2.3 0.6 0.8 0.75 3.5 3.65 9.06
4 4.4 4.6 2.8 0.65 0.85 0.8 4.0 4.15 11.24
4.5 4.9 5.1 2.9 0.8 1.0 1 4.5 4.65 15.36
5 5.4 5.6 3.4 0.9 1.1 1 5.0 5.15 17.54
6 6.4 6.7 4 1.2 1.4 1.2 6.0 6.15 26.04
8 8.5 8.8 5.5 2.0 2.4 1.5 8.0 8.15 42.76
10 10.5 10.8 6.5 2.0 2.4 2 10.0 10.25 70.16
12 12.5 12.8 7.5 2.0 2.4 2.5 12.0 12.3 104.1

M13 to M50 Large Diameter Heavy Duty Spring Pins are available with many sizes in stock

Note

(1) For information only

(2) Double shear is only applicable to carbon and 420 stainless steel. Double shear is not applicable for 300 series stainless steel.